4 Apr
2010
4 Apr
'10
6:17 p.m.
I've been trying to determine which users are using what ports, in an
effort to transition people away from non-encrypted
connections. However, i'm having difficulty because the perdition logs
don't seem to log the username in any consistent way that I can
determine.
In many cases I see logs like this:
Apr 4 06:26:43 auk perdition[23849]: Auth: 0.0.0.0->0.0.0.0 ----
server="0.0.0.0" port="143" status="ok"
with no username logged, but in other cases I do see the username
logged, although in an odd way:
Apr 4 06:27:36 auk perdition[23147]: Auth: 0.0.0.0->0.0.0.0 ----micah(a)riseup.net"
server="0.0.0.0" port="143" status="ok"
What can I do to get the username logged properly?
On a side note, I was expecting it to show up as
'username=micah(a)riseup.net' but it seems to be formatted funny.
thanks for your work on perdition,
micah
--
"It is no measure of health to be well adjusted to a profoundly sick society." -
J Krishnamurti
5 Apr
5 Apr
11:57 p.m.
On Sun, Apr 04, 2010 at 02:17:12PM -0400, Micah Anderson wrote:
I've been trying to determine which users are using what ports, in an
effort to transition people away from non-encrypted
connections. However, i'm having difficulty because the perdition logs
don't seem to log the username in any consistent way that I can
determine.
In many cases I see logs like this:
Apr 4 06:26:43 auk perdition[23849]: Auth: 0.0.0.0->0.0.0.0 ----
server="0.0.0.0" port="143" status="ok"
with no username logged, but in other cases I do see the username
logged, although in an odd way:
Apr 4 06:27:36 auk perdition[23147]: Auth: 0.0.0.0->0.0.0.0
----micah(a)riseup.net" server="0.0.0.0" port="143"
status="ok"
What can I do to get the username logged properly?
On a side note, I was expecting it to show up as
'username=micah(a)riseup.net' but it seems to be formatted funny.
thanks for your work on perdition,
Yes, that does seem funny. I have some patches to re-work that logging,
which I am trying very hard to merge along with a pile of unrelated
changes. I'll try even harder to get that merge done, because I suspect
that it resolves the problem you are seeing.
16 May
16 May
3:03 p.m.
On Tue, 6 Apr 2010 09:57:52 +1000, Simon Horman <horms(a)verge.net.au> wrote:
On Sun, Apr 04, 2010 at 02:17:12PM -0400, Micah
Anderson wrote:
Just checking to see where this is at. I haven't seen anything since
this message, but I am certainly not clued into the right channels so I
may have missed it.
thanks for working on this,
micah
I've been trying to determine which users are using what ports, in an
effort to transition people away from non-encrypted
connections. However, i'm having difficulty because the perdition logs
don't seem to log the username in any consistent way that I can
determine.
In many cases I see logs like this:
Apr 4 06:26:43 auk perdition[23849]: Auth: 0.0.0.0->0.0.0.0 ----
server="0.0.0.0" port="143" status="ok"
with no username logged, but in other cases I do see the username
logged, although in an odd way:
Apr 4 06:27:36 auk perdition[23147]: Auth: 0.0.0.0->0.0.0.0
----micah(a)riseup.net" server="0.0.0.0" port="143"
status="ok"
What can I do to get the username logged properly?
On a side note, I was expecting it to show up as
'username=micah(a)riseup.net' but it seems to be formatted funny.
thanks for your work on perdition,
Yes, that does seem funny. I have some patches to re-work that logging,
which I am trying very hard to merge along with a pile of unrelated
changes. I'll try even harder to get that merge done, because I suspect
that it resolves the problem you are seeing.
11:23 p.m.
On Sun, May 16, 2010 at 11:03:45AM -0400, micah anderson wrote:
On Tue, 6 Apr 2010 09:57:52 +1000, Simon Horman
<horms(a)verge.net.au> wrote:
Hi Micah,
I've been offline quite a bit lately, so progress is a bit slower than I
would like. I have committed the changes to
hg.vergenet.net/perdition/perdition but I haven't made any fresh
Debian uploads.
On Sun, Apr 04, 2010 at 02:17:12PM -0400, Micah
Anderson wrote:
Just checking to see where this is at. I haven't seen anything since
this message, but I am certainly not clued into the right channels so I
may have missed it.
I've been trying to determine which users are using what ports, in an
effort to transition people away from non-encrypted
connections. However, i'm having difficulty because the perdition logs
don't seem to log the username in any consistent way that I can
determine.
In many cases I see logs like this:
Apr 4 06:26:43 auk perdition[23849]: Auth: 0.0.0.0->0.0.0.0 ----
server="0.0.0.0" port="143" status="ok"
with no username logged, but in other cases I do see the username
logged, although in an odd way:
Apr 4 06:27:36 auk perdition[23147]: Auth: 0.0.0.0->0.0.0.0
----micah(a)riseup.net" server="0.0.0.0" port="143"
status="ok"
What can I do to get the username logged properly?
On a side note, I was expecting it to show up as
'username=micah(a)riseup.net' but it seems to be formatted funny.
thanks for your work on perdition,
Yes, that does seem funny. I have some patches to re-work that logging,
which I am trying very hard to merge along with a pile of unrelated
changes. I'll try even harder to get that merge done, because I suspect
that it resolves the problem you are seeing.
5096
days inactive
5138
days old
3 comments
3 participants
participants (3)
-
Micah Anderson -
micah anderson
-
Simon Horman