15 Sep
2009
15 Sep
'09
7:24 p.m.
Hi,
I am testing perdition-pbs and I am not sure how the information should
appear in the popauth.bd. I see that the IP address of my external
machine that I used for IMAP4s access is being added to popauth.db (but
there are some extra characters on it):
VERSION=3
format=print
type=hash
h_nelem=4
db_pagesize=4096
HEADER=END
POP:XX.XXX.XX.XX\00
POP:XX.XXX.XX.XX\00
TIME:POP:XX.XXX.XX.XX\00
\d0\f4\afJ
TIME:POP:XX.XXX.XX.XX\00
B\ec\afJ
DATA=END
The sendmail map lookup always fails for the key, but the IP is on the db.
map_lookup(popauth, POP:XX.XX.XX.XX, %0=POP:XX.XX.XX.XX) => NOT FOUND (0)
check_rcpt returns: $# error $@ 5 . 7 . 1 $: "550 Relaying denied"
Please would perdtion-pbs work with Sendmail 8.14 and the sendmail
POPAUTH hack from sendmail.org?
Thank you very much,
Zane
15 Sep
15 Sep
8:02 p.m.
I am trying to get my perdition install to talk back to my exchange 2007 system. I can see
to get it to work if i first hook the iphone to the internal wifi and get the exchange box
as the mail server, and then change it to be the imap proxy. If i don't do this then
I get invalid password.
Secondly I just did a fresh install of my test box and now perdition is trying to send
imap port 143 to the exchange instead of 993. Used the same config file as before. Any
help is greatly appreciated in this.
outgoing_server X.X.X.X
log_facility /var/log/perdition.imap4s.log
no_lookup
timeout 40
#imap_capability "IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE
LITERAL+"
imap_capability "IMAP4 IMAP4rev1 AUTH=NTLM IDLE NAMESPACE LITERAL+"
ssl_mode ssl_all
ssl_cert_file /etc/perdition/imap.crt
ssl_key_file /etc/perdition/imapkey.pem
pid_file /var/run/perdition.imap4s/perdition.imap4s.pid
ssl_no_cert_verify
ssl_no_cn_verify
ssl_cert_self_signed
ssl_ca_accept_self_signed
debug
connection_logging
#no_daemon
listen_port 993
outgoing_port 993
server_resp_line
________________________________
8:21 p.m.
Hi,
This is my test perdition.imap4s.conf file. I am using port 993. This
part is working great at this moment. Are you testing PBS as well? Any
luck with PBS?
outgoing_server XX.XX.XX.XX
listen_port 993
outgoing_port=993
server_ok_line
debug
connect_relog 120
connection_logging
imap_capability "IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE
LITERAL+"
ssl_mode ssl_all
ssl_listen_ciphers "ALL:!SSLv2:@STRENGTH"
ssl_no_cert_verify
ssl_no_cn_verify
ssl_ca_accept_self_signed
ssl_cert_accept_self_signed
ssl_ca_path /usr/local/etc/perdition/perdition.ca
ssl_cert_file /usr/local/etc/perdition/certs/perdition.crt.pem
ssl_key_file /usr/local/etc/perdition/certs/perdition.key.pem
I am trying to get my perdition install to talk back
to my exchange
2007 system. I can see to get it to work if i first hook the iphone to
the internal wifi and get the exchange box as the mail server, and
then change it to be the imap proxy. If i don't do this then I get
invalid password.
Secondly I just did a fresh install of my test box and now perdition
is trying to send imap port 143 to the exchange instead of 993. Used
the same config file as before. Any help is greatly appreciated in this.
outgoing_server X.X.X.X
log_facility /var/log/perdition.imap4s.log
no_lookup
timeout 40
#imap_capability "IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE
LITERAL+"
imap_capability "IMAP4 IMAP4rev1 AUTH=NTLM IDLE NAMESPACE LITERAL+"
ssl_mode ssl_all
ssl_cert_file /etc/perdition/imap.crt
ssl_key_file /etc/perdition/imapkey.pem
pid_file /var/run/perdition.imap4s/perdition.imap4s.pid
ssl_no_cert_verify
ssl_no_cn_verify
ssl_cert_self_signed
ssl_ca_accept_self_signed
debug
connection_logging
#no_daemon
listen_port 993
outgoing_port 993
server_resp_line
------------------------------------------------------------------------
------------------------------------------------------------------------
______________________________________________
Perdition-users mailing list
Perdition-users(a)vergenet.net
http://lists.vergenet.net/listinfo/perdition-users
11:08 p.m.
On Tue, Sep 15, 2009 at 12:24:56PM -0700, Zane Cirne wrote:
Hi,
I am testing perdition-pbs and I am not sure how the information should
appear in the popauth.bd. I see that the IP address of my external
machine that I used for IMAP4s access is being added to popauth.db (but
there are some extra characters on it):
VERSION=3
format=print
type=hash
h_nelem=4
db_pagesize=4096
HEADER=END
POP:XX.XXX.XX.XX\00
POP:XX.XXX.XX.XX\00
TIME:POP:XX.XXX.XX.XX\00
\d0\f4\afJ
TIME:POP:XX.XXX.XX.XX\00
B\ec\afJ
DATA=END
How are you viewing the information in the popauth.db?
The sendmail map lookup always fails for the key, but
the IP is on the db.
map_lookup(popauth, POP:XX.XX.XX.XX, %0=POP:XX.XX.XX.XX) => NOT FOUND (0)
check_rcpt returns: $# error $@ 5 . 7 . 1 $: "550 Relaying denied"
Please would perdtion-pbs work with Sendmail 8.14 and the sendmail
POPAUTH hack from sendmail.org?
Thank you very much,
Zane
______________________________________________
Perdition-users mailing list
Perdition-users(a)vergenet.net
http://lists.vergenet.net/listinfo/perdition-users
11:37 p.m.
Hi,
I am using Berkeley DB db_dump (db_dump -p popauth.db).
Thanks,
Zane
On Tue, Sep 15, 2009 at 12:24:56PM -0700, Zane Cirne
wrote:
Hi,
I am testing perdition-pbs and I am not sure how the information should
appear in the popauth.bd. I see that the IP address of my external
machine that I used for IMAP4s access is being added to popauth.db (but
there are some extra characters on it):
VERSION=3
format=print
type=hash
h_nelem=4
db_pagesize=4096
HEADER=END
POP:XX.XXX.XX.XX\00
POP:XX.XXX.XX.XX\00
TIME:POP:XX.XXX.XX.XX\00
\d0\f4\afJ
TIME:POP:XX.XXX.XX.XX\00
B\ec\afJ
DATA=END
How are you viewing the information in the popauth.db?
The sendmail map lookup always fails for the key,
but the IP is on the db.
map_lookup(popauth, POP:XX.XX.XX.XX, %0=POP:XX.XX.XX.XX) => NOT FOUND (0)
check_rcpt returns: $# error $@ 5 . 7 . 1 $: "550 Relaying denied"
Please would perdtion-pbs work with Sendmail 8.14 and the sendmail
POPAUTH hack from sendmail.org?
Thank you very much,
Zane
______________________________________________
Perdition-users mailing list
Perdition-users(a)vergenet.net
http://lists.vergenet.net/listinfo/perdition-users
16 Sep
16 Sep
12:36 a.m.
On Wed, Sep 16, 2009 at 09:08:09AM +1000, Simon Horman wrote:
On Tue, Sep 15, 2009 at 12:24:56PM -0700, Zane Cirne
wrote:
Hi,
I must confess that its a really long time since I've poked around
perdition-pbs. I think that the entries above are correct and the
non-ascii are the expiry timestamps stored as binary.
You can get an idea of how perdition-pbs reads what is in the database
by running 'perdition-pbs --mode list'. Unfortunately that doesn't help
your problem which seems to relate to how sendmail is reading what
is in the database.
Are you using the HACK('popauth') ruleset for sendmail? I have not tested
it, and I'm not sure if its out of date, but it looks like it should work.
http://www.sendmail.org/~ca/email/chk-89n.html
http://www.sendmail.org/~ca/email/rules/popauth.m4
Hi,
I am testing perdition-pbs and I am not sure how the information should
appear in the popauth.bd. I see that the IP address of my external
machine that I used for IMAP4s access is being added to popauth.db (but
there are some extra characters on it):
VERSION=3
format=print
type=hash
h_nelem=4
db_pagesize=4096
HEADER=END
POP:XX.XXX.XX.XX\00
POP:XX.XXX.XX.XX\00
TIME:POP:XX.XXX.XX.XX\00
\d0\f4\afJ
TIME:POP:XX.XXX.XX.XX\00
B\ec\afJ
DATA=END
How are you viewing the information in the popauth.db?
> The sendmail map lookup always fails for the key, but the IP is on the db.
>
> map_lookup(popauth, POP:XX.XX.XX.XX, %0=POP:XX.XX.XX.XX) => NOT FOUND (0)
> check_rcpt returns: $# error $@ 5 . 7 . 1 $: "550 Relaying denied"
>
> Please would perdtion-pbs work with Sendmail 8.14 and the sendmail
> POPAUTH hack from sendmail.org?
5:25 p.m.
Thanks. Actually, it started working after the update of the Berkeley
DB; and I am not sure what was wrong anymore.
I was not able to get that working with my Exchange server port 587,
though. I found a work around, using the information from the db to
allow relay via a sendmail server.
And yes: using the perdtion-pbs --mode list I was seeing the timestamps
for the entries in the DB file :)
Are you using the HACK('popauth') ruleset for sendmail? I have not tested
it, and I'm not sure if its out of date, but it looks like it should work.
http://www.sendmail.org/~ca/email/chk-89n.html
http://www.sendmail.org/~ca/email/rules/popauth.m4
Yes, this is the hack I am using. Thanks.
5340
days inactive
5341
days old
6 comments
3 participants
participants (3)
-
Joshua Moles -
Simon Horman -
Zane Cirne