Streamline Problem

[Horms]

On Mon, Oct 09, 2006 at 07:30:12AM +0800, Geruel M. Casibu wrote:
> Hi to All
> I am trying to set up UM3 using the "Streamline High Availibility and Load Balancing" like in example (http://www.ultramonkey.org/3/topologies/sl-ha-lb-eg.html).
> 
> My OS is CentOS 4.4.
> 
> I've been trying to sort this for three days now and I cant figure out whats wrong? I've attached also my configurations.
> 
> My two machines (cross-a.sysad.com, cross-b.sysad.com) are both Directors / Real Servers (My test servers before implementing it to production use). The service I want to Load Balance is HTTP. eth0 on both machines are the net where the VIP will be used. eth0 is used for Heartbeat. 
> 
> Node1/Ldirector1: cross-a.sysad.com/172.16.10.66
> Node2/Ldirector2: cross-b.sysad.com/172.16.10.8
> VIP/ifcfg:0: cross.sysad.com/172.16.10.67
> GW: 172.16.10.1
> 
> Any suggestions on what might I be doing wrong?

I think you might have a buggy version of /etc/ha.d/resource.d/LVSSyncDaemonSwap

Could you try the attached version.

-- 
Horms
  H: http://www.vergenet.net/~horms/
  W: http://www.valinux.co.jp/en/

-------------- next part --------------
#!/bin/sh
#
#        $Id: LVSSyncDaemonSwap,v 1.0 2005/02/04 20:04:00 horms Exp $
#
#        Copyright (C) 2005 Horms <horms at verge.net.au>
#
#        This script manages the LVS synchronisation daemon
#
#       Please note that as of 2.4.28 or so, this is no longer needed
#       as both the master and backup daemon can run simultaneously
#
#        usage: $0 {master|slave} {start|stop|status|monitor}
#
#        The first argument, master or backup, is the YING.
#        The YANG is internally calculated to be which ever or master and
#        backup YING is not.
#
#       e.g $0 LVSSyncDaemonSwap master start   # YING=master YANG=backup
#           $0 LVSSyncDaemonSwap backup start   # YING=backup YANG=master
#               
#
#       "start" will stop the YANG if it is running and starts the YING
#       "stop"  will stop the YING if it is running and starts the YANG
#       "clobber" is a non-standard target stop the YING if it is running
#                 an stop the YANG if it is running 
#       "bootstrap" is a non-standard target that acts the same way as stop,
#                   except that it exits with status 100, so it
#                   can be run just once as a respawn target from heartbeat
#                   Might be better to add a spawn directive to heartbeat
#
#
#
unset LANG
LC_ALL=C
export LC_ALL

prefix=/usr
exec_prefix=/usr
. /etc/ha.d/shellfuncs

USAGE="usage: $0 {master|slave} {start|stop|status|monitor}\n\nNote: $0 only works on Linux";

status() {
    if ps ax | grep " \[ipvs sync$1\]$" > /dev/null; then
        echo "running"
        return 3
    fi

    echo "stopped"
    return 0
}

run_ipvsadm () {
    ipvsadm $@
    rc=$?
    if [ $rc -ne 0 ]; then
        echo "ERROR: ipvsadm $@ failed."
        return $rc
    fi

    return 0
}

ying_yan() {
    if [ "$1" = "master" ]; then
        echo "backup"
    else 
        echo "master"
    fi
}

start_stop() {
    YING=$1
    YANG=$2

    if [ $(status $YING) = "running" ]; then
        return 0
    fi

    if [ $(status $YANG) = "running" ]; then
            run_ipvsadm --stop-daemon || return $?
        ha_log "info: ipvs sync$YANG down"
    fi

    run_ipvsadm --start-daemon $YING || return $?

    ha_log "info: ipvs sync$YING up"
    return 0
}

start() {
    start_stop $1 $(ying_yan $1) || return $?
    ha_log "info: ipvs sync$YING obtained"
    return 0
}

stop() {
    start_stop $(ying_yan $1) $1 || return $?
    ha_log "info: ipvs sync$YANG released"
    return 0
}

clobber() {
    if [ $(status master) = "running" ]; then
            YING=master
    elif [ $(status backup) = "running" ]; then
            YING=backup
    else
        return 0
    fi

    
    run_ipvsadm --stop-daemon || return $?
    ha_log "info: ipvs sync$YING down"
    return 0
}

monitor() {
    status $1
    return $?
}

usage() {
  echo -e $USAGE >&2
}

if
    [ $# -ne 2 ]
then
    usage
    exit 1
fi

case $2 in
    start)
        start $1
        ;;
    stop)
        stop $1
        ;;
    status)
        status $1
        ;;
    monitor)
        monitor $1
        ;;
    bootstrap)
        stop $1
	exit 100
        ;;
    clobber)
        clobber $1
        ;;
    *)
        usage
        exit 1
        ;;
esac

exit $?